Home Idea

After he was more than 10 years, you probably already bored with your wardrobe. But if the condition is still good, why should immediately throw it away? After all, you can conjure it new look, just by adding a thin wood here and there and change the paint.

Materials and Equipment Required:
Wood thin (can be used for the wooden eaves or less), hand saws, nails, hammers, chalk, wood glue (PVA), acrylic paint, varnish, brushes, and wooden handle.

To Make
1. Clean your closet and remove the dirt from the cupboard handles. Use a spatula (scraper / small shovel) to fill the timber and let the cement dry.

2. Puree the entire surface of the cabinet with sandpaper. Make sure all surfaces, including the sleek emery too well. Clean the dust and sand used with dry cloth.

3. Measure the length of wood to the corner of the closet on each side of the left-right, front, rear, also top-down (see picture), marked with chalk.

4. Place the entire timber with wood glue so as not to shift, then strengthened them with a nail-sized.

5. Replace cabinet door handles also with the new, to be more trendy select the handle of a round timber. Pairs are also part of his leg.

6. Cover the entire surface and lattice base cabinets with paint. Drain and puree with sandpaper. Repeat this layering and after dry sandpaper until smooth.

7. After you clean the surface of the dust, you just paint it with acrylic paint whose color can be adjusted to the needs. When dry seal with varnish for better results and long lasting.